Recommended Action None.
Revision 2
Parameters endpoint
ipsectunnel
2.31.43. failed_to_add_rules (ID: 01800313)
Default Severity ERROR
Log Message Failed to add rules after remote endpoint <endpoint> have been
resolved by DNS for IPsec tunnel: <ipsectunnel>
Explanation Failed to add rules to tunnel after remote endpoint have been
resolved by DNS.
Gateway Action IPsec_tunnel_disabled
Recommended Action None.
Revision 2
Parameters endpoint
ipsectunnel
2.31.44. failed_to_add_rules (ID: 01800314)
Default Severity ERROR
Log Message Failed to commit rules after remote endpoint <endpoint> have
been resolved by DNS for IPsec tunnel: <ipsectunnel>
Explanation Failed to add rules to tunnel after remote endpoint have been
resolved by DNS.
Gateway Action IPsec_tunnel_disabled
Recommended Action None.
Revision 2
Parameters endpoint
ipsectunnel
2.31.45. new_remote_endpoint_ip (ID: 01800315)
Default Severity INFORMATIONAL
Log Message Resolved remote-endpoint <endpoint> to IP <ip> for IPsec tunnel
<ipsectunnel>
Explanation Tunnel have succesfully been reconfigured after remote endpoint
have been resolved.
Chapter 2: Log Message Reference
340
To Next Page
Loading...
