Gateway Action close
Recommended Action Decrease the maximum allowed SMTPALG sessions, or try to free
some of the RAM used.
Revision 2
Context Parameters ALG Module Name
2.1.57. failed_connect_smtp_server (ID: 00200153)
Default Severity ERROR
Log Message SMTPALG: Failed to connect to the SMTP Server. Closing the
connection.
Explanation The SMTP ALG could not connect to the receiving SMTP server,
resulting in that the ALG session could not be successfully opened.
Gateway Action close
Recommended Action None.
Revision 3
Context Parameters ALG Module Name
ALG Session ID
2.1.58. invalid_server_response (ID: 00200155)
Default Severity ERROR
Log Message SMTPALG: Could not parse server response code
Explanation The SMTP ALG failed to parse the SMTP response code from server.
Gateway Action close
Recommended Action If possible, verify response codes sent from server.
Revision 3
Context Parameters Connection
ALG Module Name
ALG Session ID
2.1.59. sender_email_id_mismatched (ID: 00200156)
Default Severity WARNING
Log Message SMTPALG: Mismatching sender address
Explanation The SMTP "MAIL FROM:" command does not match the "From:"
header. The e-mail will be tagged as spam.
Chapter 2: Log Message Reference
69
To Next Page
Loading...
