D-Link DFL-260E

Explanation The unit failed to reassemble data. The reason for this is problaby
due to an IDP engine evasion attack.
Gateway Action ignore
Recommended Action None.
Revision 1
Parameters idrule
srcip
srcport
destip
destport
Context Parameters Rule Name
2.24.13. idp_outofmem (ID: 01300013)
Default Severity ERROR
Log Message Failed to scan data. ID Rule: <idrule>. Source IP: <srcip>. Source Port:
<srcport>. Destination IP: <destip>. Destination Port: <destport>.
Closing connection.
Explanation The unit failed to scan data. The reason for this is due to low amount
of memory.
Gateway Action close
Recommended Action Review your configuration.
Revision 1
Parameters idrule
srcip
srcport
destip
destport
Context Parameters Rule Name
2.24.14. idp_outofmem (ID: 01300014)
Default Severity ERROR
Log Message Failed to scan data. ID Rule: <idrule>. Source IP: <srcip>. Source Port:
<srcport>. Destination IP: <destip>. Destination Port: <destport>.
Explanation The unit failed to scan data. The reason for this is due to low amount
of memory.
Gateway Action ignore
Recommended Action Review your configuration.
Chapter 2: Log Message Reference
296