to client. This could possibly be a result of lack of memory.
Gateway Action None
Recommended Action None.
Revision 1
Parameters peer
connection
string
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.93. illegal_command (ID: 00200219)
Default Severity WARNING
Log Message FTPALG: SITE EXEC from <peer> not allowed, rejecting command
Explanation The client tried to issue a "SITE EXEC" command, which is not valid
since the client is not allowed to do this. The command will be
rejected.
Gateway Action rejecting_command
Recommended Action If the client should be allowed to do issue "SITE EXEC" commands,
modify the FTPALG configuration.
Revision 1
Parameters peer
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.94. illegal_direction1 (ID: 00200220)
Default Severity WARNING
Log Message FTPALG: Illegal direction for command(1), peer=<peer>. Closing
connection.
Explanation A command was sent in an invalid direction, and the connection will
be closed.
Gateway Action close
Recommended Action None.
Revision 1
Parameters peer
Chapter 2: Log Message Reference
83
To Next Page
Loading...
