EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
652 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gateway Action host_state_creation_aborted
Recommended Action Issue the "memory" CLI command and check for modules with
abnormal memory consumption. Otherwise, revise configuration in
order to free more RAM.
Revision 1
2.25.4. idp_piped_state_replaced (ID: 06100004)
Default Severity DEBUG
Log Message Replaced IDP pipe host entry <replaced_host>
Explanation An old dynamic pipe entry was removed and replaced since the
maximum number of pipe states were reached.
Gateway Action state_replaced
Recommended Action None.
Revision 1
Parameters replaced_host
old_host_ttl
2.25.5. idp_piped_state_expire (ID: 06100005)
Default Severity DEBUG
Log Message Removed IDP dynamic pipe state for host <host> due to TTL expire
Explanation An old dynamic pipe entry was removed since its TTL expired.
Connections to and from this host are no longer piped.
Gateway Action state_removed
Recommended Action None.
Revision 1
Parameters host
2.25.6. conn_idp_unpiped (ID: 06100006)
Default Severity NOTICE
Log Message IDP Pipe disabled. Throughput no longer limited to <limit>
Explanation A configuration change regarding the dynamic pipes' throughput
parameters have occured. The dynamic piping for this connection is
disabled.
Gateway Action pipe_removed
Chapter 2: Log Message Reference
300

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals