2.46.7. processing_memory_limit_reached (ID: 04800009)
Default Severity NOTICE
Log Message Maximum processing memory limit reached
Explanation The reassembly subsystem has reached the maximum limit set on its
processing memory. This will decrease the performance of
connections that are processed by the reassembly subsystem.
Gateway Action drop
Recommended Action Consider increasing the setting Reassembly_MaxProcessingMem.
Revision 1
2.46.8. maximum_connections_limit_reached (ID: 04800010)
Default Severity NOTICE
Log Message Maximum connections limit reached
Explanation The reassembly subsystem has reached the maximum number of
concurrent connections.
Gateway Action none
Recommended Action Consider increasing the setting Reassembly_MaxConnections.
Revision 1
Context Parameters Connection
2.46.9. state_memory_allocation_failed (ID: 04800011)
Default Severity ERROR
Log Message Failed to allocate the memory needed to activate reassembly on a
connection
Explanation The reassembly subsystem has failed to allocate the memory
needed to activate reassembly on a connection.
Gateway Action none
Recommended Action Review configuration to reduce memory consumption.
Revision 1
Context Parameters Connection
Chapter 2: Log Message Reference
525
To Next Page
Loading...
