D-Link DFL-260E

Explanation Unable to find transport area for a vlink.
Gateway Action skip_iface
Recommended Action Check OSPF area configuration.
Revision 1
Parameters area
vlink
Context Parameters Rule Name
2.40.49. internal_error_unable_to_map_identifier (ID:
02400301)
Default Severity WARNING
Log Message Internal error: Unable to map a identifier for LSA Type:<lsatype>
ID:<lsaid> AdvRouter:<lsaadvrtr>
Explanation Unable to map an identifier for a LSA.
Gateway Action None
Recommended Action None.
Revision 1
Parameters lsatype
lsaid
lsaadvrtr
Context Parameters Rule Name
2.40.50. lsa_size_too_big (ID: 02400302)
Default Severity WARNING
Log Message Requested LSA size(<lsasize>) too big. Unable to create LSA
Explanation Unable to create LSA since the size is too big.
Gateway Action None
Recommended Action None.
Revision 1
Parameters lsasize
Context Parameters Rule Name
2.40.51. memory_usage_exceeded_70_percent_of_max_allowed
Chapter 2: Log Message Reference
491