EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
652 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.1.83. hybrid_data (ID: 00200209)
Default Severity INFORMATIONAL
Log Message FTPALG: Hybrid data channel closed
Explanation A hybrid data channel was closed.
Gateway Action None
Recommended Action None.
Revision 1
Context Parameters ALG Module Name
ALG Session ID
Rule Information
Connection
2.1.84. illegal_chars (ID: 00200210)
Default Severity WARNING
Log Message FTPALG: 8 bit characters in control channel from <peer> not
allowed. Closing connection
Explanation 8 bit characters were discovered in the control channel. This is not
allowed according to the FTPALG configuration, and the connection
will be closed.
Gateway Action close
Recommended Action If 8 bit characters should be allowed, modify the FTPALG
configuration.
Revision 1
Parameters peer
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.85. control_chars (ID: 00200211)
Default Severity WARNING
Log Message FTPALG: Unexpected telnet control chars in control channel from
<peer>. Closing connection
Explanation Unexpected telnet control characters were discovered in the control
channel. This is not allowed according to the FTPALG configuration,
and the connection will be closed.
Chapter 2: Log Message Reference
79

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals