D-Link DFL-260E

Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.88. port_command_disabled (ID: 00200214)
Default Severity WARNING
Log Message FTPALG: PORT command not allowed from <peer>. Rejecting
command
Explanation The client tried to issue a "PORT" command, which is not valid since
the client is not allowed to do active FTP. The command will be
rejected.
Gateway Action rejecting_command
Recommended Action If the client should be allowed to do active FTP, modify the FTPALG
configuration.
Revision 1
Parameters peer
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.89. illegal_command (ID: 00200215)
Default Severity WARNING
Log Message FTPALG: Failed to parse PORT parameters from <peer>.
String=<string>. Closing connection
Explanation Invalid parameters to the "PORT" command were received. The
connection will be closed.
Gateway Action close
Recommended Action None.
Revision 1
Parameters peer
string
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.90. illegal_ip_address (ID: 00200216)
Chapter 2: Log Message Reference
81