D-Link DFL-260E - No_Route (ID: 01800504); Ipsec_Interface_Disabled (ID: 01800506); No_Route (ID: 01800507); No_Userauth_Specified_For_Eap (ID: 01800600)

2.31.68. no_route (ID: 01800504)
Default Severity ERROR
Log Message Failed to lookup route. No route for packet.
Explanation No remote gateway for packet, i.e no route defined.
Gateway Action packet_will_be_dropped
Recommended Action None.
Revision 1
2.31.69. ipsec_interface_disabled (ID: 01800506)
Default Severity ERROR
Log Message IPsec interface disabled
Explanation IPsec interface disabled.
Gateway Action None
Recommended Action None.
Revision 1
2.31.70. no_route (ID: 01800507)
Default Severity WARNING
Log Message Failed to lookup route. No route for packet to remote gateway:
<remote_ip>
Explanation No remote gateway for packet, i.e no route defined.
Gateway Action None
Recommended Action None.
Revision 1
Parameters ipsec_if
table
remote_ip
2.31.71. no_userauth_specified_for_eap (ID: 01800600)
Default Severity ERROR
Log Message No EAP userauth rule found for eap authentication with remote ike
Chapter 2: Log Message Reference
348