Log Message Application content allowed. Application: <application> Attribute:
<attribute> Value: <value>
Explanation The identified application attribute and its value is allowed by the
Application Content Control policy.
Gateway Action None
Recommended Action Modify the Application Content Control policy if this traffic should
be denied.
Revision 1
Parameters application
attribute
value
Context Parameters Connection
2.4.10. application_content_denied (ID: 07200017)
Default Severity WARNING
Log Message Application content denied. Application: <application> Attribute:
<attribute> Value: <value>
Explanation The configured Application Content Control policy does not allow
the identified attribute or its value. The connection is closed.
Gateway Action close
Recommended Action Modify the Application Content Control policy if this traffic should
be allowed.
Revision 1
Parameters application
attribute
value
Context Parameters Connection
2.4.11. out_of_memory (ID: 07200018)
Default Severity ERROR
Log Message Out of memory
Explanation Failed to allocate memory for Application Content Control.
Gateway Action None
Recommended Action Modify the units configuration to make more RAM available.
Revision 1
Context Parameters Connection
Chapter 2: Log Message Reference
187
To Next Page
Loading...
