fail for compressed files.
Gateway Action data_blocked_control_and_data_channel_closed
Recommended Action Change fail mode setting to allow, if resumed file transfers of
compressed files should be allowed.
Revision 2
Parameters filename
filetype
Context Parameters ALG Module Name
ALG Session ID
2.1.118. blocked_filetype (ID: 00200253)
Default Severity NOTICE
Log Message FTPALG: Requested file:<filename> is blocked as this file is identified
as type <filetype>, which is in block list.
Explanation The file is present in the block list. It will be blocked as per
configuration.
Gateway Action data_blocked_control_and_data_channel_closed
Recommended Action If this file should be allowed, update the ALLOW/BLOCK list.
Revision 2
Parameters filename
filetype
Context Parameters ALG Module Name
ALG Session ID
2.1.119. resumed_compressed_file_transfer (ID: 00200254)
Default Severity WARNING
Log Message FTPALG: The file <filename> (File type: <filetype> ) cannot be sent to
antivirus scan engine.
Explanation Decompression module cannot decompress a file that has been
resumed. The file is allowed without any further scanning since Fail
Mode is Allow.
Gateway Action allow_data_without_scan
Recommended Action Update Fail-Mode parameter if the file should be blocked.
Revision 2
Parameters filename
filetype
Chapter 2: Log Message Reference
93
To Next Page
Loading...
