Default Severity WARNING
Log Message The file <filename> has too many archive levels. Maximum allowed
is <max_depth>.
Explanation The file archive exceeds the maximum allowed depth. Since Fail
Mode is set to Deny the data transfer will be aborted in order to
protect the receiver.
Gateway Action block_data
Recommended Action Change Fail Mode parameter to Allow if files that fail decompression
should be allowed without scanning. Increase the Max. Archive
Depth parameter to allow deeper files to be scanned.
Revision 1
Parameters filename
max_depth
[layer7_srcinfo]
[layer7_dstinfo]
Context Parameters ALG Module Name
ALG Session ID
Connection
2.3.23. max_archive_depth_exceeded (ID: 05800029)
Default Severity WARNING
Log Message The file <filename> has too many archive levels. Maximum allowed
is <max_depth>.
Explanation The file archive exceeds the maximum allowed depth. Since Fail
Mode is set to Allow the data transfer will be allowed to continue.
Gateway Action allow_data
Recommended Action Change Fail Mode parameter to Deny if files that fail decompression
should be blocked. Increase the Max. Archive Depth parameter to
allow deeper files to be scanned.
Revision 1
Parameters filename
max_depth
[layer7_srcinfo]
[layer7_dstinfo]
Context Parameters ALG Module Name
ALG Session ID
Connection
2.3.24. unknown_encoding (ID: 05800182)
Default Severity WARNING
Chapter 2: Log Message Reference
180
To Next Page
Loading...
