2.31.75. unknown_eap_status (ID: 01800604)
Default Severity ERROR
Log Message Failed to add EAP-SIM as eap protocol
Explanation Failed to add EAP-SIM as accepted eap protocol.
Gateway Action None
Recommended Action None.
Revision 1
2.31.76. eap_but_not_passthrough (ID: 01800605)
Default Severity INFORMATIONAL
Log Message Radius and EAP enabled, but PASS THROUGH is not set as
authentication method
Explanation Radius and EAP enabled, but PASS THROUGH is not set as
authentication method.
Gateway Action None
Recommended Action None.
Revision 1
2.31.77. eap_not_supported (ID: 01800606)
Default Severity ERROR
Log Message No support for EAP/RADIUS: no EAP protocols can be enabled
Explanation CORE sw does not support EAP/RADIUS. I.e EAP protocols can be
enabled.
Gateway Action eap_authentication_will_fail
Recommended Action None.
Revision 1
2.31.78. can_not_add_eap_auth_type (ID: 01800607)
Default Severity INFORMATIONAL
Log Message Can't add EAP authentication: insufficient information
Explanation Can't add EAP authentication: insufficient information.
Chapter 2: Log Message Reference
350
To Next Page
Loading...
