D-Link DFL-260E - Wcf_Server_Bad_Reply (ID: 00200128); Request_Url (ID: 00200129); Out_Of_Memory (ID: 00200130)

2.1.32. wcf_server_bad_reply (ID: 00200128)
Default Severity ERROR
Log Message HTTPALG: Failed to parse WCF server response
Explanation The WCF service could not parse the server response. The WCF
transmission queue is reset and a new server connection will be
established.
Gateway Action restarting
Recommended Action None.
Revision 1
Parameters failedserver
Context Parameters ALG Module Name
2.1.33. request_url (ID: 00200129)
Default Severity NOTICE
Log Message HTTPALG: Requesting URL <url>. Categories: <categories>. Audit:
<audit>. Override: <override>. ALG name: <algname>.
Explanation The URL has been requested.
Gateway Action allow_audit_mode
Recommended Action None.
Revision 2
Parameters categories
audit
override
url
algname
Context Parameters Connection
Connection
ALG Module Name
ALG Session ID
2.1.34. out_of_memory (ID: 00200130)
Default Severity CRITICAL
Log Message HTTPALG: Failed to allocate memory
Explanation The unit does not have enough available RAM.
Chapter 2: Log Message Reference
59