D-Link DFL-260E - Invalid_Configuration_Of_Force_Open (ID: 01802104); Invalid_Rule_Setting (ID: 01802105); Invalid_Rule_Setting (ID: 01802107); Max_Number_Of_Policy_Rules_Reached (ID: 01802110)

Revision 1
2.31.136. invalid_configuration_of_force_open (ID: 01802104)
Default Severity ERROR
Log Message Auto-start rule does not specify single IP address or domain name
for its remote peer
Explanation Can not use Auto-start rule (force open) for roaming tunnels.
Gateway Action VPN_tunnel_disabled
Recommended Action Reconfigure_IPsec.
Revision 1
2.31.137. invalid_rule_setting (ID: 01802105)
Default Severity ERROR
Log Message Both REJECT and PASS defined for a rule
Explanation Can not specify both pass and reject for a rule.
Gateway Action None
Recommended Action None.
Revision 1
2.31.138. invalid_rule_setting (ID: 01802107)
Default Severity ERROR
Log Message To-tunnel specified for a REJECT rule
Explanation To-tunnel can not be specified for REJECT rule.
Gateway Action None
Recommended Action None.
Revision 1
2.31.139. max_number_of_policy_rules_reached (ID:
01802110)
Default Severity CRITICAL
Chapter 2: Log Message Reference
370