D-Link DFL-260E - Invalid_Tunnel_Configuration (ID: 01802208); Invalid_Tunnel_Configuration (ID: 01802209); Invalid_Tunnel_Configuration (ID: 01802210)

Explanation Anti-replay detection must be enabled when using 64 bit sequence
numbers.
Gateway Action VPN_tunnel_disabled
Recommended Action Reconfigure_tunnel.
Revision 1
Parameters tunnel
2.31.153. invalid_tunnel_configuration (ID: 01802208)
Default Severity ERROR
Log Message No IPsec transform (AH or ESP) specified for tunnel <tunnel>
Explanation IPsec transform type must be specified for tunnel.
Gateway Action VPN_tunnel_disabled
Recommended Action Reconfigure_tunnel.
Revision 2
Parameters tunnel
2.31.154. invalid_tunnel_configuration (ID: 01802209)
Default Severity ERROR
Log Message Auto-start tunnel <tunnel> configured for `per-port' or `per-host' SA.
Explanation `per-port' or `per-host' SA can not be specified for auto-start tunnels
[tunnel].
Gateway Action VPN_tunnel_disabled
Recommended Action Reconfigure_tunnel.
Revision 1
Parameters tunnel
2.31.155. invalid_tunnel_configuration (ID: 01802210)
Default Severity ERROR
Log Message Both `auto-start' and `dont-initiate' specified for tunnel <tunnel>
Explanation Both `auto-start' and `dont-initiate' can not be specified for a tunnel.
Gateway Action VPN_tunnel_disabled
Chapter 2: Log Message Reference
375