2.11. CONN
These log messages refer to the CONN (State engine events, e.g. open/close connections)
category.
2.11.1. conn_open (ID: 00600001)
Default Severity INFORMATIONAL
Log Message Connection opened
Explanation A connection has been opened.
Gateway Action None
Recommended Action None.
Revision 1
Context Parameters Rule Information
Connection
Packet Buffer
2.11.2. conn_close (ID: 00600002)
Default Severity INFORMATIONAL
Log Message Connection closed
Explanation A connection has been closed.
Gateway Action close
Recommended Action None.
Revision 1
Context Parameters Rule Information
Connection
2.11.3. connection_table_full (ID: 00600003)
Default Severity WARNING
Log Message Closing (replacing) this connection; connection table full
Explanation The connection table is currently full, and the unit needs to open a
new connection. This specific connection is closed, and replaced
with the new connection.
Gateway Action replacing_conn
Recommended Action None.
Chapter 2: Log Message Reference
209