D-Link DFL-260E

Gateway Action close
Recommended Action Decrease the maximum allowed HTTPALG sessions, or try to free
some of the RAM used.
Revision 2
Context Parameters ALG Module Name
2.1.16. failure_connect_http_server (ID: 00200112)
Default Severity ERROR
Log Message HTTPALG: Failed to connect to the HTTP Server. Closing connection.
ALG name: <algname>.
Explanation The unit failed to connect to the HTTP Server, resulting in that the
ALG session could not be successfully opened.
Gateway Action close
Recommended Action Verify that there is a listening HTTP Server on the specified address.
Revision 1
Parameters algname
Context Parameters ALG Module Name
ALG Session ID
2.1.17. content_type_mismatch (ID: 00200113)
Default Severity NOTICE
Log Message HTTPALG: Content type mismatch in file <filename>. Identified
filetype <filetype>
Explanation The filetype of the file does not match the actual content type. As
there is a content type mismatch, data is discarded.
Gateway Action block_data
Recommended Action None.
Revision 1
Parameters filename
filetype
contenttype
Context Parameters ALG Module Name
ALG Session ID
2.1.18. wcf_override_full (ID: 00200114)
Chapter 2: Log Message Reference
53