EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
652 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.38.6. lacp_link_down (ID: 07700006)
Default Severity ERROR
Log Message <physiface> appears to be down.
Explanation .
Gateway Action exclude_link
Recommended Action .
Revision 1
Parameters physiface
laiface
2.38.7. lacp_disabled_half_duplex (ID: 07700007)
Default Severity ERROR
Log Message <physiface> has been disabled because it is operating at Half
Duplex which is unsupported by the Link Aggregation feature.
Explanation The specified interface has been disabled because it is operating at
Half Duplex which is not supported by the Link Aggregation feature.
Gateway Action exclude_link
Recommended Action Look for hardware or configuration limitations that may be
preventing the affected link from operating in Full Duplex mode.
Revision 1
Parameters physiface
laiface
Chapter 2: Log Message Reference
468

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals