D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
iv
Device Management Methods
The DGS-3100 series and DGS-3100-24TG provide different methods for managing the device including:
 Web Based Management Interface
 SNMP-Based Management
 Command Line Console
Web Bas
ed Management Interface
Once the device is installed, network managers can configure the switch, monitor the LED panel, and display statistics
graphically via a web browser, including:
 Netscape Navigator (version 7.0 and higher)
 Microsoft® Internet Explorer (version 5.0 and higher)
 Mozilla Firefox (version 2.0 and higher)
 Apple Safari
SNMP-Based Management
The system also supports SNMPv1, SNMPv2c, and SNMPv3. The SNMP agent decodes the incoming SNMP messages,
and replies to requests with MIB objects stored in the database. The SNMP agent updates the MIB objects to generate
statistics and counters.
Command Line Console
The device also supports device configuration using the Command Line Interface. A terminal is connected to device via the
serial console port.

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C