D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
202
Methods for Defining Access Control Lists
Access Control Lists (ACLs) can be configured in the DGS-3100 series via the WEB GUI in either of the following ways:
 ACL Configuration Wizard — This feature automatically creates both Access Profiles and their rules. After the
system creates an Access Profile and an Access Rule, it binds it to a port/LAG or a group of ports/LAG. Each
operation via the Wizard can create either a MAC-based ACL or IP-based ACL. The user cannot combine both
types of ACLs in the same operation. This feature is described below.
 ACL Profile List — This feature is used to manually create profiles and rules. This feature is described in the
Defining Access Profile Lists section.

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C