D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Device Environment
Device Environment displays basic information regarding the operating environment of the device in areas such as
temperature and ventilation.
To view Device Environment:
1. Click Monitoring > Device Environment. The Device Environment Page opens:
Figure 0-13 Device Environment Page
The Device Environment Page contains the following fields:
Field Description
Unit
Indicates the stacking member for which the device environment is displayed.
Side Fan Status
Displays the side fan status. The possible values are:
– OK — Indicates the fan is operating normally.
– Fail — Indicates the fan is not operating normally.
– N/A — Indicates a fan is not installed on the device.
Temperature
The current temperature of the device. Each device type has a different Warning Temperature,
N/A means that the device HW revision does not support temperature reading.
Warning
Temperature
The maximum allowed operating temperature of the device.
191

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C