D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Viewing CPU Utilization
The CPU Utilization Page contains information about the system’s CPU utilization.
1. Click Monitoring > CPU Utilization. The CPU Utilization Page opens:
Figure 6-2 CPU Utilization Page
The CPU Utilization Page contains the following fields:
Field Description
Utilization
Displays current CPU utilization by percentage.
Time Interval
Defines the 1-60 second time intervals in which the usage samples are taken as follows:
1,2,3,4,5,10,20,30,40,50,60.
Record Number
Defines the record number.
Show/Hide
Displays the CPU utilization information. The possible fields are:
Utilization checked — Utilization information is enabled. This is the default value.
Utilization unchecked — Utilization information is disabled.
2. Define the Time Interval and Record Number fields.
3. Define the Show/Hide field.
4. Click
. A sample record of CPU utilization is stored, and the device is updated.
173

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C