DGS-3100 Series Gigabit Stackable Managed Switch User Manual
164
Field Description
Timeout (1-30secs)
Indicates the amount of time that passes, in which no authentication activity occurs, after
which the authentication session times out.
Retransmit (1-10 times)
Indicates the number of times the port attempts to re- authenticate a timed out session.
2. Define the IP Address, Protocol, Key, Port, Timeout, and Retransmit fields.
3. Click
.The Authentication Host properties are defined, and the device is updated.
To edit an authentication, click
adjacent to the relevant IP Address on the list. The upper fields
display the current values, which then can be edited.
To delete an authentication, click
adjacent to the relevant IP Address on the list. The Authentication
Server settings are defined, and the device is updated.
Defining Login Methods
Network users must first login to the device on the Login Method Lists Page. Access as non-administrative users is granted.
To configure the device as a Network Administrator, the user must also log on to the device on the Enable Method Lists
Page.
User
aut
hentication occurs in the order the methods are selected. If the first authentication method is not available, the next
selected method is used. For example, if the selected authentication method is RADIUS, Local, and the RADIUS server is
not available, the user is authenticated locally. To define the user only login method:
1. Click Security > Access Authentication Control > Login Method Lists. The Login Method Lists Page opens:
Figure 5-13 Login Method Lists Page
The Login Method Lists Page contains the following fields:
Field Description
To Next Page
Loading...
