D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
69
3
CONFIGURING L2 FEATURES
This section contains information for enabling and configuring L2 Features. This section contains the following topics:
 Enabling Jumbo Frames
 Configuring VLANs
 Configuring GVRP
 Defining Trunking
 Traffic Segmentation
 Configuring LACP
 Defining IGMP Snooping
 Defining MLD Snooping
 Configuring Port Mirroring
 Configuring Spanning Tree
 Defining Forwarding and Filtering
 Conf
iguring LLDP
 Configuring Voice VLAN


D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C