DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Telnet Setting
The Telnet Setting allows users to enable or disable Telnet on the device. To enable or disable Telnet:
1. Click Configuration > Telnet Setting. The Telnet Setting opens:
Figure 0-25 Telnet Setting Page
The Telnet Setting contains the following fields:
Field Description
Telnet Setting
Defines the Telnet status on the device. The possible values are:
Enabled – Enables Telnet.
Disabled – Disables Telnet.
Display Information
Logs
Defines the Telnet logging on the device. The possible values are:
Enabled – Enables all Telnet logging messages to be displayed.
Disabled – Disables Telnet logging so that only high severity messages are displayed.
If this is selected, logging on SSH and console sessions is also disabled.
2. Select the Telnet Setting.
3. Click
. The Telnet setting on the device is updated.
65
To Next Page
Loading...
