D-Link DGS-3100 SERIES - Defining LLDP Basic TLV Settings

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Defining LLDP Basic TLV Settings
The LLDP Basic TLVS Setting Page displays LLDP basic TLV port information and contains parameters for configuring
LLDP basic TLV port settings.
1. Click L2 Features > LLDP > LLDP Basic TLVS Setting. The LLDP Basic TLVS Setting Page opens:
Figure 0–30 LLDP Basic TLVS Setting Page
The LLDP Basic TLVS Setting Page contains the following fields:
Field Descri
p
tion
Unit
Indicates the stacking member for which the LLDP basic TLV port settings are
defined.
From Port
Defines the first port in a consecutive sequence of ports.
To Port
Defines last port in a consecutive sequence of ports.
Port Description
Specifies whether the Port Description TLV is enabled on the port. The possible
field values are:
Enabled — Enables the Port Description TLV on the port.
Disabled — Disables the Port Description TLV on the port.
System Name
Specifies whether the System Name TLV is enabled on the port. The possible field
values are:
Enabled — Enables the System Name TLV on the port.
Disabled — Disables the System Name TLV on the port.
System Description
Specifies whether the System Description TLV is enabled on the port. The possible
field values are:
Enabled — Enables the System Description TLV on the port.
Disabled — Disables the System Description TLV on the port.
System Capabilities
Specifies whether the System Capabilities TLV is enabled on the port. The possible
field values are:
113