DGS-3100 Series Gigabit Stackable Managed Switch User Manual
86
Traffic Segmentation
The Traffic Segmentation Page enables administrators to force traffic from source ports to bypass the Forwarding Database
(FDB), and forward all Unicast, Multicast and Broadcast traffic to the forwarding port.
To define Traffic Segmentation:
1. Click L2 Features > Traffic Segmentation. The Traffic Segmentation Page opens:
Figure 0–13 Traffic Segmentation Page
The Traffic Segmentation Page contains the following fields:
Field Description
Source Ports
The port(s) from which the traffic is forwarded by the forwarding port(s).
Unit or LAG — The stacking member’s Unit ID and LAGs on which the source port is
located.
Port — The source port number.
Forwarding Ports
The port(s) from which the traffic from the source port is transmitted.
Unit or LAG — The stacking member’s Unit ID and LAGs on which the forwarding port is
located.
Port — The forwarding port number.
2. Define the Source and Forwarding Ports.
3. Click
. The new traffic forwarding definition appears in the Traffic Segmentation table, and the
device is updated.
To delete a Traffic Segmentation entry:
4. Select the entry in the table.
5. Click
. The entry is deleted, and the device is updated.
To Next Page
Loading...
