D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Field Description
Host Timeout
Defines the time the host waits to receive a message before timing out. The
default time is 260 seconds. The field range is 60-16711450 seconds.
Router Timeout
Defines the time the Multicast router waits to receive a message before it
times out. The default value is 300 seconds. The field range is 1-16711450
seconds.
State
Indicates if IGMP snooping is enabled on the VLAN. The possible field
values are:
Enable — Enables IGMP Snooping on the VLAN.
Disable — Disables IGMP Snooping on the VLAN. (This is the default
value).
Querier State
Indicates if an IGMP Querier is enabled on the VLAN. The possible field
values are:
Enabled — An IGMP Querier is enabled on the VLAN.
Disabled — An IGMP Querier is disabled on the VLAN. (This is the
default value).
Querier Version
Indicates the IGMP Querier version on the VLAN. The possible field values
are IGMPv2 and IGMPv3 (The default is IGMPv2).
Static Router Port Setting (Edit button)
Displays the IGMP Snooping and Static Router Ports Settings Page.
Multicast Entry Table (View Button)
Displays the Multicast Entry Table.
2. Click . The IGMP Snooping and Static Router Ports Settings Page opens:
Figure 0–16 IGMP Snooping and Static Router Ports Settings Page
89

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C