DGS-3100 Series Gigabit Stackable Managed Switch User Manual
3. After th
e ports were assigned to the Guest VLAN, the user needs to configure a Radius Server that will hold the
MAC Authentication database. This should be done via click Security > 802.1X > Authentic RADIUS Server
page according to the example below.
4. Click Security > 802.1X > 802.1X Setting page: first, 802.1x should be enabled globally and in the port level,
802.1x Control should be configured as ‘ForceAuthorized’.
5. The second step on Security > 802.1X > 802.1X Setting page will be configuration of the required ports as ‘MAC
Based’ authentication (opposite to ‘Port Based’ authentication)
151
To Next Page
Loading...
