DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Field Description
Method 2
Indicates the second method used to authenticate the network user. The possible field values
are:
RADIUS — User authentication occurs at the RADIUS server.
TACACS+ — The user authentication occurs at the TACACS+ server.
None — No user authentication occurs.
Local — User authentication occurs at the device level. The device checks the user name
and password for authentication.
Method 3
Indicates the third method used to authenticate the network user. The possible field values are:
RADIUS — User authentication occurs at the RADIUS server.
TACACS+ — The user authentication occurs at the TACACS+ server.
None — No user authentication occurs.
Local — User authentication occurs at the device level. The device checks the user name
and password for authentication.
Method 4
Indicates the fourth method used to authenticate the network user. The possible field values
are:
RADIUS — User authentication occurs at the RADIUS server.
TACACS+ — The user authentication occurs at the TACACS+ server.
None — No user authentication occurs.
Local — User authentication occurs at the device level. The device checks the user name
and password for authentication.
2. Define the Method List Name in the Method List Name field.
3. Select the methods used to authenticate network users in the Method 1, Method 2, Method 3 and, Method 4 fields.
4. Click
. The Enable method and passwords are defined, and the device is updated.
To edit the Enable Method List, click
adjacent to an Enable Method List Name on the list. The upper
fields display the current values, which then can be edited.
To delete an Enable Method List Name, click
. The Enable Method Lists are defined, and the device is
updated.
167
To Next Page
Loading...
Need help?
General
