tion
TCP Source Port — Matches the packet to the TCP Source Port
TCP Destination Port — Matches the packet to the TCP Destination Port
UDP All — Specifies a UDP Packets filtering.
UDP Source Port — Matches the packet to the UDP Source Port
UDP Destination Port — Matches the packet to the UDP Destination Port
Action
Defines the ACL forwarding action matching the rule criteria. The possible values are:
Permit — Forwards packets if all other ACL criteria are met.
Deny — Drops packets if all other ACL criteria is met.
Rate Limiting — Rate limiting is activated if all other ACL criteria is met.
Change 1p Priority — VPT (CoS) value is changed if all other ACL criteria is met.
Replace DSCP — Reassigns a new DSCP value to the packet if all other ACL criteria are
met.
Ports
Defines ports to be configured. An example of possible values is: 1:1, 1:4-6, and 2:6.
Time Range
Specifies whether the configured ACL is time-based.
Range Name
Selects the user-defined time range name to apply to the configured ACL.
2. Define the From, To, Service Type, Action, and Ports fields.
3. To configure a time-based ACL, Check the Time
Range box and select the Range Name from the list.
4. Click
. The ACLs are configured, and the device is updated.
For advanced ACL setting please see the section below.
To Next Page
Loading...
