DGS-3100 Series Gigabit Stackable Managed Switch User Manual
206
5.
To add an ACL profile Click
.
The Add ACL Profile Page opens:
Figure 0-3 Add ACL Profile Page
The Add ACL Profile Page contains the following fields:
Field Description
L2 ACL
Defines the ACL profile Layer 2 protocols. The possible values are:
Tagged — Defines the profile Layer 2 to match 802.1Q fields in the Layer 2 header.
Untagged — Defines the profile Layer 2 to check the Layer 2 header without the 802.1Q
fields .
L3 IPv4 ACL
Defines the ACL profile Layer 3 protocols. The possible fields are:
ICMP — Specifies ICMP as the Layer 4 protocol that the access profile checks.
IGMP — Specifies IGMP as the Layer 4 protocol that the access profile checks
TCP — Specifies TCP as the Layer 4 protocol that the access profile checks.
UDP — Specifies UDP as the Layer 4 protocol that the access profile checks.
L3 IPv6 ACL
Defines the IPv6 ACL profile Layer 3 IPv6 protocols. The possible fields are:
ICMP — Specifies ICMP as the Layer 3 IPv6 protocol that the access profile checks.
TCP — Specifies TCP as the Layer 3 IPv6 protocol that the access profile checks.
UDP — Specifies UDP as the Layer 3 IPv6 protocol that the access profile checks.
1. Define the L2 ACL or L3 ACL fields.
2. Click
The Add ACL Profile Page updates accordingly, enabling selection of the
packet field to
create filtering masks.
To Next Page
Loading...
