D-Link DGS-3100 SERIES - Page 271

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
255
ID
SEVERITY CATEGORY MESSAGE DESCRIPTION
al current method succeeded –
an access is granted.
SYSLG8.31.63
Information
al AAA
User CLI session for user
%(2)s over %(1)s , source
%(3)y destination %(5)s
%(4)y TERMINATED.
The Telnet/SSH session
may still be connected.
The CLI session for the
specified user between the
specified source and
destination addresses is
terminated. The Telnet/SSH
session may still be
connected.
SYSLG8.31.64
Information
al AAA
User CLI session for user
%(2)s over %(1)s , source
%(3)y destination %(5)s
%(4)y ACCEPTED
The CLI session for the
specified user between the
specified source and
destination addresses is
accepted.
SYSLG8.31.7
Information
al
AAA Method failed
SYSLG8.31.8
Information
al
AAA Method error
SYSLG8.45.18
Information
al Up/Download
Files Copy - source URL
%(1)s destination URL
%(2)s
The files are copied from
the specified source address
to the specified destination
address.
SYSLG8.48.31
Information
al
STP
Attention: port %(1)j from
which the bpdu was
received is configured as
Fast Port
A received BPDU message
indicates that the specified
port is configured as the
Fast port..
SYSLG8.49.11
Information
al
sshpClientId: illegal
connection id %(1)d
SYSLG8.49.14
Information
al Security
Closed SSH connection to
%(1)y
SYSLG8.49.2
Information
al
SSH SSH log: %(1)s
The string parameter
describes the reason this
message was called.
SYSLG8.49.9
Information
al
AAA
sshpClientFind: illegal
index %(1)d
SYSLG8.5.168
Information
al
console
MIB variable %(1)s not
found in temporary DB
The specified MIB variable
was not found in the
Mib2cli temporary DB.
SYSLG8.5.169
Information
al SNMP
Unknown field name
%(1)s
The
SNMPServG_name_2_Id
function failed because
MIB variable name is
unknown.
SYSLG8.5.170
Information
al console
Command Handler for
command ID %(1)s is
missing
The command handler for
the specified command ID
is missing.
SYSLG8.5.171
Information
al console
Command <%(1)s>
processed in %(2)d.%(3)d
secs
It took the specified number
of seconds to process the
specified command.
SYSLG8.50.18
Information
al
Interface
Port changed status from
notPresent to notPresent@
An indication of not present
port when this port is