D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Figure 0-5 Firmw
are Download Page
The Firmware Download Page contains the following fields:
Field Description
HTTP Download
Indicates that the Firmware file is downloaded via an HTTP server.
Unit — Indicates if the Firmware file is downloaded to a specific stacking member or to
All stacking members.
File — Indicates the Firmware file that is downloaded to the stack or specific device.
TFTP Download
Indicates that the Firmware file is downloaded via a TFTP server.
Unit — Indicates if the Firmware file is downloaded to a specific stacking member or to
All stacking members.
Server IP Address — Specifies the TFTP Server IP Address from which files are
downloaded.
File — Indicates the Firmware file that is downloaded to the stack or specific device.
2. Select HTTP or TFTP Download field.
3. Define the Unit field.
4. For Http download, define the File field, or alternatively, browse to select the file.
5. Click
. The Firmware is downloaded, and the device is updated.
12

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C