DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Figure 0-11 TimeZone Settings Page
The TimeZone Settings Page contains the following fields:
Field Description
Daylight Savings Time State
Defines type of DST enabled on the device. The possible field values are:
Disable — Disables DST on the device. This is the default values.
Repeating — Enables setting repeating DST. This option requires defining
begin and end times by specific date and hour.
Annual — Enables setting annual DST. This option requires defining begin
and end times by the specific dates.
Daylight Saving Time Offset in
Minutes
Defines the local DST offset in minutes. The default time is 60 minutes. The
possible field values are:
30 — Defines the local offset for 30 minutes.
60 — Defines the local offset for 60 minutes.
90 — Defines the local offset for 90 minutes.
120 — Defines the local offset for 120 minutes.
Time Zone Offset:from GMT
Indicates the difference between Greenwich Mean Time (GMT) and local time.
For example, the Time Zone Offset for Paris is GMT +1, while the Time Zone
Offset for New York is GMT –5.
DST Repeating Settings Sections
The Repeating Mode enables setting repeating DST. This option requires defining begin and end times by specific day and
hour. For example, the network administrator defines that DST begins the second Saturday during April and ends on the last
Sunday in October.
Field Description
45
To Next Page
Loading...
