D-Link DGS-3100 SERIES User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
56
The SNMP Host Table Page contains the following fields:
Field Description
Host IP Address
Defines the IP address to which the traps are sent.
SNMP Version
Defines the trap type. The possible field values are:
SNMPV1 — Indicates that SNMP Version 1 traps are sent.
SNMPV2c —Indicates that SNMP Version 2 traps are sent.
SNMPV3-NoAuth-NoPriv — Indicates that the SNMP version 3 is
assigned with a NoAuth-NoPriv security level and traps of that level
will be sent
SNMPV3-Auth-NoPriv — Indicates that the SNMP version 3 is
assigned with an Auth-NoPriv security level and traps of that level will
be sent
SNMPV3-Auth-Priv — Indicates that the SNMP version 3 is assigned
with an Auth-Priv security level and traps of that level will be sent
Community String / SNMPv3 User Name
Defines the community string or assigned to the SNMP V3 user.
2. Define the Host IP Address field.
3. Select the trap type in the SNMP Version field.
4. Define the Community String / SNMPv3 User Name field.
5. Click
. The SNMP Host Table is defined, and the device is updated.
To delete a SNMP Host Table Page List entry:
1. Select an en
try.
2. Click
. The entry is deleted, and the device is updated.

D-Link DGS-3100 SERIES Specifications

General

Type	Managed
Layer	Layer 2+
Ports	10/100/1000BASE-T
SFP Ports	2 or 4 (depends on the model)
Additional SFP Ports	No
VLANs	Yes
Stacking	Yes, Physical Stacking
QoS	Yes
Jumbo Frame Support	Up to 9K bytes
Management	Web-based
Operating Temperature	0°C to 40°C
Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Model	DGS-3100 SERIES
Storage Temperature	-40°C to 70°C