D-Link DSL-2888A

15D-Link DSL-2888A User Manual
Section 3 - Getting Started
The wizard is designed to guide you through a step-by-step process to congure your new
D-Link router and connect to the Internet.
Click Next to continue.
Please wait while your router detects your Internet connection type. If the router detects
your Internet connection, you may need to enter your ISP information such as username
and password.
Step 1: Install your device
Step 2: Congure your Network and Wi-Fi Settings
Step 3: Set your router password
Welcome
Internet
Wi-Fi ClientDSL-2888A
This wizard will guide you through a step-by-step process to congure your new D-Link
device.
Next
English
⌵
Setup Wizard (continued)
ISP Settings
Internet
Wi-Fi ClientDSL-2888A
Select your country and Internet service provider(ISP).
NextBack
WAN Access Type:
ADSL
⌵
Country:
Australia
⌵
ISP:
Not Listed
⌵
Encapsulation
LLC
⌵
VPI:
8
VCI:
35
Congure your Internet connection using the drop down menus. Select either ADSL or VDSL
from WAN Access Type. Use the Country and ISP drop down menus to quickly congure
the VPI, and VCI settings. To manually congure these settings, select Not Listed.
Select your ISP's Encapsulation type and click Next to continue.