D-Link DSL-2888A - Page 20

16D-Link DSL-2888A User Manual
Section 3 - Getting Started
PPPoE
Internet
Wi-Fi ClientDSL-2888A
To setup this Internet connection, you will need to have a User Name from your Internet
Service Provider. If you do not have this information, please contact your ISP.
NextBack
Username:
Password:
If the router detected a username and password is required, enter your ISP's PPPoE username
and password and click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The software is no longer
needed and will not work through a router.
Setup Wizard (continued)
Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have
this passphrase or key entered to be able to connect to your wireless network.
Click Next to continue.
Wi-Fi Settings
Internet
Wi-Fi ClientDSL-2888A
To setup a Wi-Fi network you will need to give your Wi-Fi network a name(SSID) and
password.
The Wi-Fi Network Name is up to 32 characters. You will need to join your Wi-Fi network
using this Network Name (SSID).
The password must contain at least 8 characters. You will need to join your Wi-Fi network
using this password.
NextBack
2.4GHz Network Name:
2.4_GHz_Wi-Fi_Network
5GHz Network Name:
5_GHz_Wi-Fi_Network
2.4GHz Wi-Fi Password:
A_Str0nG_P@ssW0rd!%!
5GHz Wi-Fi Password:
A_Str0nG_P@ssW0rd!%!