D-Link DSL-2888A - Page 50

46D-Link DSL-2888A User Manual
Section 4 - Conguration
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable IPv6 prex delegation.
If you disabled DHCP-PD, enter the LAN IPv6 PD Address:
LAN IPv6 PD
Address:
Enter the LAN IPv6 PD Address.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN IPv6 link-local address.
Advanced Settings - Address Autoconguration Settings
Enable Automatic
IPv6 Address
Assignment:
Enable or disable the Automatic IPv6 Address Assignment feature.
Autoconguration
Type:
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
If you selected SLAAC+RDNSS or Stateless DHCP as the Autoconguration Type:
Router
Advertisement
Lifetime:
Enter the router address lifetime (in minutes).
If you selected Stateful DHCPv6 as the Autoconguration Type:
IPv6
Advertisement
Lifetime:
Enter the IPv6 address lifetime (in minutes).
Click Save when you are done.
Network (continued)
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment:
Enabled
Autoconguration Type: SLAAC+RDNSS
⌵
IPv6 Advertisement Lifetime: 10 minutes
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment:
Enabled
Autoconguration Type:
SLAAC+Stateless DHCP
⌵
IPv6 Advertisement Lifetime: 10 minutes
ADDRESS AUTOCONFIGURATION SETTINGS
Enable Automatic IPv6 Address Assignment:
Enabled
Autoconguration Type: Stateful DHCPv6
⌵
Router Advertisement Lifetime: minutes