xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6- 66. Access Rule Tables for IP-MAC Binding rule
Figure 6- 67. Access Rule Display windows for IP MAC Binding
NOTE: When configuring the ACL mode function of the IP-MAC binding function, please pay
close attention to previously set ACL entries. Since the ACL mode entries will fill the first two
available access profiles and access profile IDs denote the ACL priority, the ACL mode entries
may take precedence over other configured ACL entries. This may render some user-defined
ACL parameters inoperable due to the overlapping of settings combined with the ACL entry
priority (defined by profile ID). For more information on ACL settings, please see “Configuring
the Access Profile” section mentioned previously in this chapter.
NOTE: Once ACL profiles have been created by the Switch through the IP-MAC binding
function, the user cannot modify, delete or add ACL rules to these ACL mode access profile
entries. Any attempt to modify, delete or add ACL rules will result in a configuration error as
seen in the previous figure.
NOTE: When uploading configuration files to the Switch, be aware of the ACL configurations
loaded, as compared to the ACL mode access profile entries set by this function, which may
cause both access profile types to experience problems.
93
To Next Page
Loading...
