xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
View Table Clicking this button instructs the Switch to display a table rather than a line graph.
View Line Chart Clicking this button instructs the Switch to display a line graph rather than a table.
Transmitted (TX)
To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu and then
select the port by using the Port pull down menu. The user may also use the real-time graphic of the Switch and/or switch stack at
the top of the web page by simply clicking on a port. Click, Monitoring > Errors > Transmitted (TX) to view the following
graph of error packets received on the Switch.
Figure 11- 14. Tx Error Analysis (line graph)
To view the Transmitted Error Packets Table, click the link View Table, which will show the following table:
260
To Next Page
Loading...
