xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
IP-MAC Binding Port
This table is used to enable or disable IP-MAC binding on
specific ports. Select a port or a range of ports with the From
and To fields. Enable or disable the port with the State field.
The user must also enable ports in this window to set the ACL
Mode for IP-MAC Binding, as previously stated. Click Apply
to save changes. Click Administration > IP-MAC-Port
Binding > IP-MAC Binding Port Menu to open the
following window.
Figure 6- 68. IP-MAC Binding Ports window
94
To Next Page
Loading...
Need help?
General