xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
802.1P Default Priority
The Switch allows the assignment of a default 802.1p priority to each port on the Switch. The priority tags are numbered from 0,
the lowest priority, to 7, the highest priority. Click QoS > 802.1p Default Priority, to view the screen shown below.
Figure 8- 6. 802.1p Default Priority window
The user may adjust the following parameters:
Parameter Description
Unit
Use the pull-down menu to choose the switch unit from the switch stack.
From….To
Enter a port range by using the pull-down menus in the From and To fields.
Priority(0-7)
The priority tags are numbered from 0, the lowest priority, to 7, the highest priority. Insert a priority
value, from 0-7 in the Priority field.
172
To Next Page
Loading...
