D-Link xStack DGS-3426 - MAC Based Access Control; MAC Based Access Control Global Settings

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
MAC Based Access Control
MAC Based Access Control Global Settings
The following window is used to set the parameters for the MAC-Based Access Control function on the Switch. Here the user can
set the state, password, authentication method, aswell as create, config or delete Guest VLANs.
To enable the MAC Based Access Control Global Settings on the switch, click Security > MAC Based Access Control > MAC
Based Access Control Global Settings.
Figure 10- 34. MAC Based Access Control Global Settings
228