xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
100
Priority option is chosen, and ports with a higher priority will take power precedence over low
priority ports.
Power Limit
Sets the power limit per PoE port based on Class as described above. Once this threshold has
been reached on the port, the PoE will go into the Power Disconnect Method, as described
above. The user may alternatively set a limit between 1000 and 16800mW by clicking the User
Define check box and manually entering a power limit in mW.
Click Apply to implement changes made. The port status of all PoE configured ports is displayed in the table in the bottom half of
the screen above.
To Next Page
Loading...
