xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7- 4. Current Static VLAN Entries window
The Current Static VLAN Entries window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding
button under the Delete heading.
To create a new 802.1Q VLAN, c new window will appear, lick the Add button in the Current Static VLAN Entries window. A
as shown below, to configure the port settings and to assign a unique name and number to the new VLAN. See the table below for
a description of the parameters in the new window.
Figure 7- 5. Static VLAN window - Add
To return to the Current Static VLANs Entries window, click the Show All Static VLAN Entries link. To change an existing
802.1Q VLAN entry, click the Modify button of the corresponding entry to modify. A new menu will appear to configure the port
settings and to assign a unique name an description of the parameters in the
new menu.
d number to the new VLAN. See the table below for a
NOTE: The Switch supports up to 4k static VLAN entries.
120
To Next Page
Loading...
