xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7- 20. LACP Port Settings window
The user may set the following parameters:
Parameter Description
Unit
Select the switch in the switch stack to be modified.
From/To
A consecutive group of ports may be configured starting with the selected port.
Mode
Active - Active LACP ports are capable of processing and sending LACP control frames. This
allows LACP compliant devices to negotiate the aggregated link so the group may be changed
dynamically as needs require. In order to utilize the ability to change an aggregated port group, that
135
To Next Page
Loading...
