xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6- 41. IPv6 Neighbor Settings – Add window
The following fields can be set or viewed:
Parameter Description
Interface Name
Enter the name of the Interface associated with this entry, if any. The Interface field is
used for addresses on the link-local network. It is recommended that the user enter the
specific interface for a link-local IPv6 address. For Global IPv6 addresses, this field may
be omitted.
Neighbor IPv6 Address
The IPv6 address of the neighbor entry. Specify the address using the hexadecimal
IPv6 Address (IPv6 Address is hexadecimal number, for example 1234::5D7F/32).
Link Layer MAC Address
The MAC address of the IPv6 neighbor entry.
After entering the IPv6 Address and MAC Address of the Static IPv6 ARP entry, click Apply to implement the new entry. To
return to the IPv6 Neighbor window, click the Show All IPv6 Neighbor Entries
link.
74
To Next Page
Loading...
Need help?
General